Installation

Basic installation instructions are provided with the Raspberry Pi Zero W Kit.

For the most up-to-date install instructions, please consult the guides below.

einsy_rambo_with_raspberry_pi.jpg

Pi Zero W Installation on Prusa MK3

How to setup the Pi Zero W kit with Octoprint pre-installed on a Micro-SD. How to get the Pi and the MK3 talking to each other.

xl_110636-tmp3145.jpg

Pi 2/3 Direct-Connect Cable Installation on Prusa MK3

How to connect the cable to a Raspberry Pi2/3b and configure Octoprint to use the header pins on the Pi for communication to the printer.

octoprint-avatar-240x240.png

Octoprint Configuration

A quick guide on how to configure Octoprint to connect to your wireless network. It will also provide basic instructions to get you up and running on Octoprint.